Write a Review

Premium aerodynamic load bars for an exceptionally quiet ride and easy installation of accessories. 2-pack. - Load bar for Thule Evo roof rack system - WindDiffuser technology disturbs airflow to reduce noise and drag for improved fuel economy - TrailEdge design reduces aerodynamic drag by allowing clean air separation from bar - SmartSlides slidable length scale doubles as an under-bar aerodynamic cover, providing quick, no-hassle rack installation - SwingBlade end cap pivots open to allow full access to the T-slot for easy accessory installs - Upper T-track with QuickAccess interface allows smooth installation and removal of accessories - BoxBeam internal structure creates an exceptionally strong load bar - Check the Thule Buyer's Guide for your vehicle's recommended bar length - 135cm / 53 in

Yakima's vehicle-specific Q Clips are required to mount Yakima Q-Towers to your car. One end of the Q Clip attaches to the Tower and the other end attaches to your vehicle's door frame when you fasten your roof rack. Plus, they're coated to protect your vehicle's finish. Select the right model Q Clip for your vehicle using Yakima's rack configurator.

Turn your hard to fit vehicle into a bike hauling machine, Hatch Huggers allow most Saris trunk mount carriers to be used on vehicles equipped with integrated spoilers or glass hatchbacks - Designed for cars that require a custom fit, including those with glass-hinge lines or surfaces that are difficult for traditional trunk rack hooks to secure to, such as plastic or squared off edges. - Hatch Huggers SL attach to your trunk rack using the existing j-hooks and straps - Quick and easy to install and attach to your Saris Trunk Rack. - Includes two bumpers that are compatible with existing rack straps and hooks for Saris trunk-mount bike racks. - Maximum capacity-two bikes, 35 lb. each, 70 lbs. total.

- Versatile: Accommodates all 15mm & 12mm thru-axles. - Flexible: Adapter for most roof racks (Thule, Yakima, Kuat) - Quick Assembly: Easy mount on any flat surface - Fully Adjustable: Thumb screw inserts allow for instant adjustments - Construction: Lightweight aluminum and steel

Got a downhill bike - Fully padded cradle accommodates dual-crown suspension forks - For use with HangTight 4 and 6 only - Accommodates 1 bike up to 37.5 lbs. - Fits most modern flat and drop-crown style dual-crown suspension forks

For rides long or short, bring your bikes with ease. Features - Superior bike stability and fit with integrated anti-sway that prevent bike to bike contact and ‘disappears’ when not needed - Bikes are safe and secure during transport thanks to 7” of spacing between each bike - Quickly attach bikes and easily secure them to the rack using the ratcheting cradle strap - Compact cradle design accommodates a wide variety of bike sizes/frame styles - Effortlessly fold down bike arms when rack is not in use - Convenient access to the rear of the vehicle using the HitchSwitch lever to tilt the rack down - Easily transfers between 1.25” and 2” hitch receivers Technical specifications - Max number of bikes: 2 - Load capacity: 75 lb - Max bike weight: 37.5 lb - Dimensions: 28.3 x 11 x 35.6 in - Folded dimensions: 14.8 x 11 x 35.6 in - Weight: 28 lb - Distance between bikes: 7 in - Carbon frame compatible - Tilt function (with bikes) - Fits 1.25" receivers - Fits 2" receivers

Rubber straps used to secure bikes to Yakima hitch and strap racks manufactured prior to 2004. Each strap has 5 holes which are 3/4" in diameter. Since 2004 we have used rubber straps called Chain Straps, which each have 8 holes that are 1/2" in diameter.

Premium trunk-mount bike carrier provides robust attachment and fits wide range of vehicles, including those with a spoiler. - Maximum fastening security to your vehicle with steel cables - Quick and easy mounting to car thanks to simple user interface and intuitive torque-limiting tightening system - Firm carrier hold and vehicle protection with twin hook attachment and rubber protection pads - Bike protection and security with soft cradles that absorb road shock and vibrations - Vehicle and bike protection with integrated anti-sway system that prevents bike-to-bike and bike-to-vehicle contact - Accommodates a variety of bike frames/geometries including smaller kids bikes thanks to adjustable bike arms - Locks the bike to the bike rack and the bike rack to the roof racks (locks included) - Bike arms fold down when not in use, and rack folds flat for easy transport and convenient storage - Easy to assemble with included tools - Possible to open vehicle trunk without any mounted bikes Technical specifications - Max number of bikes: 3 - Load capacity: 99 lb - Max bike weight: 33 lb - Dimensions: 31.5 x 30.7 x 33 in - Folded dimensions: 24 x 78 x 69 in - Weight: 19.6 lb - Carbon frame compatible - One Key System compatible - Lockable bike-to-rack - Lockable rack-to-vehicle

Freedom is a versatile lightweight rack that makes loading and unloading bikes quick and easy. Foldable upright arms securely clamp top or seat tubes with soft, non-marring pads. - Ratcheting straps keep bike stable and secure and adjust to fit most bikes - Standard wheel scoop fits up to 2.25" tires. Fat wheel trays are available separately - Adjustable to work with most bikes - Fits 1 1/4- and 2-inch hitches - Can hold two bikes weighing up to 60 lbs each - Rack weighs 20 lbs - Made in the USA

An adapter for Thule ProRide to enable transport of fatbikes. - A set of replacement wheel holders for the Thule ProRide bike carrier - Fits wheel dimensions 3 – 5 inches to enable transport of fatbikes

Don't let the sleek lines fool you. SkyLine FX is a cutting-edge roof rack with integrated crossbars and towers that has no bar overhang and is designed to support whatever you're carrying. It gives your vehicle a clean, modern aesthetic with a seamless attachment to all of our vehicle-specific Landing Pads. PRODUCT DETAILS - Integrated tower and crossbars, for a clean visual connection to the vehicle, with no crossbar overhang - Secure, easy-to-use tower specifically designed for Vehicles with Fixed Points or Tracks - Includes aerodynamic, T-slot JetStream Black crossbars - SmartFill push-down infill for easy t-slot mount attachment - Sleek tower cover styling with matte finish, tone-on-tone black logo - Easily locks to you vehicle with our SKS system (sold separately) - Multiple bar lengths available for precision sizing on various vehicle roof widths - Uses Yakima's proven Landing Pads for attachment to vehicles with fixed points or tracks - BarBed has 12° of pitch adjustment to optimize tower position and level bars PRODUCT SPECS - Weight: 5.00 lbs. - Dimensions: L 33.50 in x W 5.00 in x H 3.50 in

Thule's Load Bar End Caps are replacement end caps for rectangular load bars.

Perfect for tour operators, group rides and big families. Constructed of heavy-duty steel, our first-ever vertical bike rack safely hauls up to four mountain bikes to the trailhead. We designed and tested it in the lab and on the road to meet our demanding Yakima standards. The easy-to-operate tilt mechanism with two adjustable mast angles keep your bikes from bumping into your car, truck or SUV and makes accessing the tailgate a breeze. The HangOver’s vertical orientation carries more bikes in less space. Get ready to session! Product Details: - Transports up to 4 bikes using minimal space 37.5 lbs max per bike - Foot-operated tilt mechanism changes rack position for easy loading and unloading - Tilts down and out of the way for easy rear-of-vehicle access - Securely supports bikes by the fork crown - Fits suspension-fork bikes only - Fits fat bike suspension forks - Soft padding protects the fork’s finish - Rotating wheel cup accommodates bikes with various wheelbases - 2 mast height positions for improved ground clearance and ease of loading - 2 mast angles to avoid bike-tire contact with your vehicle - HitchLock included - Built-in bottle opener, cheers! - Fits 2" hitch receivers only - Compatible with the sold separately BackSwing - Add your own bike lock to the integrated lock loop for greater bike security Product Specs: - Weight: 65.00 lbs - Dimensions: L 22.00in x W 46.00in x H 60.00in - Some assembly required, 10 minute install - 2" hitch receiver required

Secure and easy-to-use roof-mounted front wheel holder keeps muddy and bulky wheel out of the trunk. - Fits quick-release wheels out of the box and thru-axle wheels with adapter accessory - Fits all wheels from 20" up to 29" and tire size up to 3" - Fits 9mm quick-release bikes - Fits 12-20mm thru-axle bikes with adapter accessory (adapter sold as an accessory) - Holder arm can be separated from the base for convenient loading of the front wheel off the car - Holder arm with the wheel installed easily docks to the base - Locks the front wheel to the holder and the holder to the roof rack (locks included) - Ability to fold flat when not in use - Fits most roof racks up to 90mm by around-the-bar solution including Thule SquareBar roof rack with included adapter

The Thule SUP Taxi combines security and convenience, making it the most popular Stand Up Paddle board carrier on the market. - Newly designed push button lock system allows for quick and easy locking strap operation and security - Unsurpassed security for your boards due to the heavy-duty, steel reinforced webbing and easy-to-use locking cam - Exclusive, telescoping design delivers a custom fit for board widths up to 34" wide - Equipped with Speed-Link mounting system for convenient, tool-free mounting - Dual loading design allows for transport of two boards with maximum stability - Soft, weather resistant padding protects boards during transit - 2 One Key lock cylinders (included) to secure stand-up paddle boards in the carrier - Fits all Thule Rack Systems, round bars and most factory racks

The all-new aluminum Sherpa 2.0 resets the standard for user-friendly adventure. Folding tire cradles create an abundance of clearance while Kuat's foot-actuated pivot lever lets you bask in the glory of carrying a bike or eating a breakfast burrito while unfolding your rack at the same time. With features designed around your lifestyle, this lightweight rack is as easy to take off as it is to leave on. - Re-designed pivot with optional foot assist - Semi-integrated bike lock - Front tire ratchet design with an intuitive release - Rear tire cradle features a co-molded strap to protect wheels - Folding front cradle adds space between rack and vehicle - No-tool install with hand tight hitch cam system - Gloss metallic powder available in 3 colors - Low profile arced design delivers an amazing look - 2 Bike capacity up to 40 lbs. each - Holds wheelbases up to 47-inch and tires as large as 3-inch - Increased spacing between bikes to 14-inch - Lightweight platform rack design as low as 32lbs (assembled) - Available in both 2-inch & 1.25-inch hitch sizes

Premium aerodynamic load bars for an exceptionally quiet ride and easy installation of accessories. 2-pack. - Load bar for Thule Evo roof rack system - WindDiffuser technology disturbs airflow to reduce noise and drag for improved fuel economy - TrailEdge design reduces aerodynamic drag by allowing clean air separation from bar - SmartSlides slidable length scale doubles as an under-bar aerodynamic cover, providing quick, no-hassle rack installation - SwingBlade end cap pivots open to allow full access to the T-slot for easy accessory installs - Upper T-track with QuickAccess interface allows smooth installation and removal of accessories - BoxBeam internal structure creates an exceptionally strong load bar - Check the Thule Buyer's Guide for your vehicle's recommended bar length - 118cm / 47 in

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks Fit cars CHEVROLET - Cruze 4-dr Sedan with Normal Roof 2011 - 2015

Thule's AeroBlade Edge (Flush Mount) is an integrated foot/load bar with a low-profile, aerodynamic design for vehicles without a factory rack. The AeroBlade bars use BoxBeam construction, making them some of the strongest load bars on the market with a capacity of up to 165 pounds. In addition to their wing-like shape, the AeroBlades sport a textured surface that greatly improves wind flow so you get drastically reduced noise and much better gas mileage. These flush-mount feet will need a fit kit for your specific vehicle (sold separately).

Yakima's CrossBars are a necessary component of your rack system. They attach to your towers and enable you to affix bike trays, ski carriers, rooftop boxes, etc. Strong and durable, they're made of vinyl coated steel and stand up to harsh weather.

What happens when you take the most popular trunk rack of all time and expand its vehicle compatibility by 20%? Spoiler Alert: you get the Bones EX. Cultivated in the mind of Italian designer Fabio Pedrini and brought to life in our Wisconsin-based facility, the Bones EX features a unique and game-changing leg. Featuring a leg that gracefully avoids contact with most plastic spoilers found on many of the best-selling sedans, hatch backs and SUVs, the Bones EX now fits 20% more vehicles than its legendary predecessor. And that’s not all. We’ve decked out the Bones EX with premium bike hold downs and a handy strap management system in a shade that never goes out of style. Product Features - Best fit around: fits 89% of the top vehicles sold, including those with spoilers. - VIP Treatment: premium bike hold downs that are easy to use and quick to load. - Clean, Sleek Look: integrated strap management eliminates flapping straps. - Strong & Rust-Free: injection-molded arms and legs keep the rack solid for years to come. - Carries 3 bikes (35lb/bike). - Has the largest vehicle compatibility of any trunk rack on the market – consult the Saris Fit Guide for approved fits. - Unique dog leg fits over most spoilers, including those on popular sedans, hatchbacks and SUVs. - Premium bike hold downs that are easy to use and quick to load. - Integrated strap management system provides clean look and eliminates flapping straps. - Best-in-class ratchet straps speedily fasten bike to the rack. - Strongest frame on the market. - Built with 100% recyclable materials. - Rust-free injection molded plastic. - Articulated rubber feet to protect paint. - Arc–based design separates bikes on different levels. - Patents issued and pending. - Lightweight at 11 lbs.

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks NISSAN - Versa Note 5-dr Hatchback with Normal Roof 2014 - 2019

The foundation of the Saris Modular Hitch System (MHS). Modular Base works in conjunction with MHS Bike Carriers and Accessories (sold separately) to create a versatile and dependable platform rack system for all your gear hauling needs. - Saris Modular Hitch System (MHS) is a future-proof, highly customizable modular hitch platform system consisting of a Hitch Base and a wide assortment of Bike carriers and other gear carrying accessories. - MHS Universal Hitch Base fits 1.25" and 2" receivers - Base accommodates 1 bike tray + 1 Add-On Bike Tray, sold separately - Convenient rear of vehicle access with tilting base activated with easy to use outboard handle - Compact storage on vehicle as base tilts up when not in use - Saris Hitch Tighter System locks and secures rack to vehicle with rock-solid hitch connection. - Includes hitch lock plus additional 2 lock cores for use with MHS Accessories - Fully assembled and easy to install on vehicle

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks Fit cars HYUNDAI - Accent 4-dr Sedan with Normal Roof 2018 - 2019

When adventure calls, you need a hardy bike rack to get you and your collection of bikes there. That’s why Saris built the SuperClamp 4-bike from the ground-up to be the safest, toughest, and lightest 4-bike platform hitch rack on the road. It all comes down to its super compact design, with two bikes carried on a single horizontal bar. Plus, each bike rack undergoes unparalleled testing in the heart of tundra country – meaning, if it survives in Wisconsin, it will thrive wherever your compass leads. When it comes to durability, versatility and carrying capacity, the SuperClamp 4-bike packs a punch in its light, 63 lb package. In fact, the SuperClamp is 40% lighter than similar platform hitch racks, yet is guaranteed to last a lifetime thanks to its tough steel construction. Load it up with mountain bikes, electric bikes, kid’s bikes, road bikes, insert-any-bike-type-here bike, and the SuperClamp will carry them safely to their destination. No matter where your bike wants to go, the SuperClamp 4-bike is up for the challenge. - Rock-solid dual hooks provide unmatched security, and never touches the bike’s frame. - Brawny, yet lightweight – designed to carry two bikes on a single bar for a footprint that is both compact and able to carry up to 4 bikes of any type (190 lb total). - Load ‘em up! Crafted to haul a wide variety and combination of bikes. - Tilting feature allows access to rear of vehicle, even when fully loaded (your dog will thank you), and folds up when not in use. - Functional, eye-pleasing design that looks good on any car and features integrated locks, reflectors and of course - a bottle opener.

Our burliest crossbar ever, the HD Bar is the one for heavy loads, rugged terrain and maximum utility. It delivers the muscle our new truck racks demand, and works with our StreamLine towers to get the heavy-duty job done right. The engineered aluminum construction provides superior support without weighing things down, integrated tie-down points to simplify load security, and T-slot attachment technology for adding gear mounts the fast, easy way. The Yakima Way. Product Details: - Strong, lightweight aluminum construction handles heavy loads great for rooftop tents - Integrated tie-down points on endcaps make it easy to secure gear - T-slots top and bottom to easily add Yakima and compatible gear mounts - Includes rubber infill for top T-slot for load protection and wind noise reduction - Built to last and look good doing it with a durable black powder-coat finish - Compatible with all StreamLine towers with our new HD Bar SL Adapter (sold separately #8003541) - Available in variety of lengths 55"/60"/68"/78" to create custom set-ups Dimensions: - Small = 9.61 lbs, L 55.00in x W 3.00in x H 1.50in - Medium = 10.68 lbs, Dimensions: L 60.00in x W 3.00in x H 1.50in - Large= 11.65 lbs, Dimensions: L 68.00in x W 3.00in x H 1.50in - X-Large= 12.00 lbs, Dimensions: L 78.00in x W 3.00in x H 1.50in

Tailor your towers—these super-strong clips come in a wide range of sizes and designs so you can precisely fit your BaseLine Towers to your car’s bare roof.

Saris' Hatch Huggers fasten Saris racks (sold separately) to certain vehicles. They replace the regular straps for vehicles with glass hinge lines and vehicles with narrow gaps around the trunk.

The GateKeeper tailgate pad is a perfect companion for pick-up bed bike transport. The durable nylon exterior protects your bike from your truck's tailgate while the soft felt backing protects your truck's paint. Integrated SitTight bike cradles and G-hook buckles add extra stability and protection for your bikes and the HindSight tuck-away cover opens up the view for your back-up camera, leaving you with a worry free shuttle to the top. - G-Hook tension lock system is easy on carbon bike frames and painted surfaces - Medium: Transports up to 5 bikes; Large: Transports up to 6 bikes - Rugged, vinyl coated nylon outer material resists abrasion and weather damage - Extra soft felt backing protects your trucks paint job - Add your own bike lock to the built-in cable lock loop to secure GateKeeper and your bikes to your truck - Reinforced webbing ends for easy installation under the tailgate - Integrated strap management system keeps the pad tight and secure on the way to the trailhead - HindSight tuck-away cover opens up the view for your back-up camera - Medium: Fits mid-size and some older full-size trucks with tailgates from 53-61" wide; Large: Fits modern, full-size trucks with tailgates 62" or wider - Printed graphics and silver reflective Yakima logo PRODUCT SPECS - Size Medium: Weight: 6.43 lbs; Dimensions: L 53.00 in x W 5.00 in x H 17.00 in - Size Large: Weight: 8.15 lbs; Dimensions: L 62.00 in x W 7.00 in x H 20.00 in

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks Fit cars HYUNDAI - Accent 5-dr Hatchback with Normal Roof 2018 - 2019